Appendix 13.

Lifting device (For cars homologated as from 01.01.2016)

The device must be that which has been homologated. The access to the bushes must be easy and the location must be marked as follows:

The two bushes must be marked with a ring approx. 5 mm wide, (of a distinctive and bright colour, standing out from the car's livery) around the opening.

In case the openings are not visible from the side, arrows (of a distinctive and bright colour) must be used to make them visible from the side (one per side).

The opening area must be covered to avoid the risk of possible track debris which would prevent the insertion of the lifting pin in case of need.

The covering sticker must allow the correct and complete insertion of the pin without any effort, and must be such as to be easily removeable by a marshal wearing gloves. Any kind of rigid cover is forbidden.

The covering sticker must have a pull-off tab of at least 20X10 mm which is not glued to the bodywork and which must have a distinctive bright colour.